تالار گفتگوی تخصصی مهندسی و بازرسی جوش
Choosing Pots and Pans to Improve Your Cooking - نسخه قابل چاپ

+- تالار گفتگوی تخصصی مهندسی و بازرسی جوش (https://www.weldeng.net/MyBB)
+-- انجمن: طراحی جوش (/Forum-%D8%B7%D8%B1%D8%A7%D8%AD%DB%8C-%D8%AC%D9%88%D8%B4)
+--- انجمن: الزامات طراحی جوش بر اساس نوع بارگذاری (/Forum-%D8%A7%D9%84%D8%B2%D8%A7%D9%85%D8%A7%D8%AA-%D8%B7%D8%B1%D8%A7%D8%AD%DB%8C-%D8%AC%D9%88%D8%B4-%D8%A8%D8%B1-%D8%A7%D8%B3%D8%A7%D8%B3-%D9%86%D9%88%D8%B9-%D8%A8%D8%A7%D8%B1%DA%AF%D8%B0%D8%A7%D8%B1%DB%8C)
+--- موضوع: Choosing Pots and Pans to Improve Your Cooking (/Thread-Choosing-Pots-and-Pans-to-Improve-Your-Cooking--9139)



Choosing Pots and Pans to Improve Your Cooking - ff86ll - ۱۴۰۱/۱/۹ ۰۸:۲۷ صبح

As a Fine Cooking editor, I’ve had the chance to observe lots of great cooks at work. From them, I’ve learned plenty—including the fact that good-quality pots and pans made of the right materials really can improve your cooking.
Rather than having a rack filled with دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
and pans of all shapes and sizes, owning a few well-chosen pieces will give you the flexibility to cook whatever you want and the performance you need to cook it better.

I polled some of our authors to find out which pans were the most valuable to them and why. I then came up with six pieces, starting with two indispensables: an anodized-aluminum stockpot to handle stocks, soups, stews, some sauces, blanching, boiling, and steaming; and a high-sided stainless-steel/aluminum دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
with a lid for frying, deglazing sauces, braising small items like vegetables, making sautés and fricassées, cooking rice pilafs and risottos, and a whole lot more. The other four pieces I picked make for even more cooking agility and add up to half a dozen ready-for-action pots and pans that you’ll really use (see For every pot, there’s a purpose…).

All good pans share common traitsIn a well-stocked kitchen store, you’ll see lots of first-rate pots and دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
. They may look different, but they all share essential qualities you should look for.

Look for heavy-gauge materials. Thinner-gauge materials spread and hold heat unevenly, and their bottoms are more likely to dent and warp. This means that food can scorch. Absolutely flat bottoms are particularly important if your stovetop element is electric. Heavy-gauge pans deliver heat more evenly (see “Good pans are worth their price…,” below).
To decide if a pan is heavy enough, lift it, look at the thickness of the walls and base, and rap it with your knuckles—do you hear a light ping or a dull thud? A thud is good in this case.
Good pans are worth their price because they manage heat better“Good conductor” and “heavy gauge” are the key features of good cookware. Here’s how these characteristics affect cooking.
You get responsive heat. Good heat conductors, such as copper and aluminum, are responsive to temperature changes. They’ll do what the heat source tells them to do—heat up, cool down—almost instantly.
You get fast heat flow. Heat flows more easily through a good heat conductor, assuring a quick equalizing of temperature on the cooking surface.
You get even heat diffusion. A thicker pan has more distance between the cooking surface and the heat source. By the time the heat flows to the cooking surface, it will have spread out evenly, because heat diffuses as it flows.
You get more heat. Mass holds heat (heat is vibrating mass, so the more mass there is to vibrate, the more heat there will be). The more دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
there is to heat, the more heat the pan can hold, so there’s more constant heat for better browning, faster reducing, and hotter frying.

You’ll want handles and a lid that are sturdy, heatproof, and secure. Handles come welded, riveted, or screwed. Some cooks advise against welded handles because they can break off. But Gayle Novacek, cookware buyer for Sur La Table, has seen few such cases. As long as handles are welded in several spots, they can be preferable to riveted ones because residue is apt to collect around a rivet.
Many pans have metal handles that stay relatively cool when the pan is on the stove because the handle is made of a metal that’s a poor heat conductor and retainer, such as stainless steel. Plastic and wooden handles stay cool, too, but they’re not ovenproof. Heat- or ovenproof handles mean that dishes started on the stovetop can be finished in the oven.
All lids should fit tightly to keep in moisture. The lid, too, should have a heatproof handle. Glass lids, which you’ll find on certain brands, are usually ovensafe only up to 350°F.
A pan should feel comfortable. “When you’re at the store, pantomime the way you’d use a pot or pan to find out if it’s right for you,” advises Fine Cooking contributing editor and chef Molly Stevens. If you find a pan you love but you aren’t completely comfortable with the handle, you can buy a rubber gripper to slip over the handle. Just remember that grippers aren’t ovenproof.
Some pans need special talentsDepending on what you’ll be cooking in the pan, you may also need to look for other attributes.
For sautéing and other cooking that calls for quick temperature changes, a pan should be responsive. This means that the دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
is doing what the heat source tells it to, and pronto. For example, if you sauté garlic just until fragrant and then turn down the flame, the pan should cool down quickly so the garlic doesn’t burn. Responsiveness isn’t as crucial for boiling, steaming, or the long, slow cooking that stocks and stews undergo.

For sautéing and oven roasts, it helps if the pan heats evenly up the sides. When you’ve got a pan full of chicken breasts nestling against the pan sides, you want them all to cook quickly and evenly, so heat coming from the sides of the pan is important. Even heat up the sides of a pot is important for pot roasting, too. Paul Bertolli, Fine Cooking contributing editor and chef of Oliveto restaurant in Oakland, California, counts on his enameled cast-iron oval casserole by Le Creuset for braising meat because “it’s a snug, closed cooking chamber with even heat radiating off the sides for really good browning.” Bertolli finds that meat fits especially well into the oval shape.
For cooking acidic foods, such as tomato sauces, wine sauces, and fruit fillings, a pan’s lining should be nonreactive. Stainless steel, enamel, and anodized aluminum won’t react no matter what they touch, while plain aluminum can discolor white sauces and foods that are acidic, sulfurous, or alkaline. It can even make those foods taste metallic. Eggs, vegetables in the cabbage family, and baking soda are some of the other foods vulnerable to aluminum’s graying effect. In the past, there was concern about aluminum and Alzheimer’s, but evidence has been far from conclusive.
Interview yourself to help you choose the right pansThere’s nothing wrong with matching cookware in principle. Packaged starter sets are attractively priced, and a whole lineup of matching pans can be attractive, too. But a single material isn’t suited for every kitchen task—with sets, you’re often stuck with pans you don’t need. That enameled cast-iron casserole is just right for the cassoulet you’ll move from stovetop to oven. But its matching saucepan overcooked your last caramel because the pan was too heavy to heft quickly once the sugar turned color.
You’ll get more use out of pieces that you hand-pick yourself. You may already own a matched set (the red Le Creuset ensemble I got years ago as a housewarming present is still hanging in my kitchen), but as you add new pieces to your collection, you’ll have a chance to branch out to different materials (see “Materials that make the pot”).
To decide what you need, ask yourself questions like the ones that follow.
Materials that make the potThe letters identifying the materials key to the photo below.
A. Stainless steel is a poor conductor of heat all by itself, but it’s a peerless surface metal: easy to clean, durable, shiny for good visibility, and completely nonreactive.
B. Copper is a superb heat conductor and radiates visual warmth, too, if you keep it polished. All alone, copper is highly reactive with food, so the pans must be lined. It’s often used as a bottom layer for better heat conduction.
C. Aluminum is a top-notch heat conductor and is lightweight and easy to handle, but it reacts with acidic, sulfurous, and alkaline foods. Aluminum is often used as a core or bottom layer for better heat conduction.
D. Cast iron is an excellent retainer of heat and great for high temperatures. It’s relatively slow to heat up and cool down, and needs thorough drying and oiling.
E. Nonstick coatings have greatly improved to withstand high heat and abrasion.
F. Anodized aluminum is aluminum that’s been electrochemically sealed, making for a nonreactive, hard surface. The dark interior, though, makes it difficult to see color change in pan juices and translucent sauces.
G. Enameled cast iron’s coating solves the maintenance problems of cast iron, but the heating benefits remain. The enamel coating can chip with wear and abrasion.
Are you more likely to make saucy dishes like fricassées and sautés than delicate foods like omelets and crêpes? A bigger sauté or frying pan with high sides and a lid may be a better choice than a shallower, slope-sided omelet pan without one. “At home, I make a lot of dishes where the pasta gets thrown in with the other ingredients for the last few minutes, and my anodized-aluminum sauté pan is the one I always grab,” says Molly Stevens of her favorite Calphalon pan. “It’s responsive, I know the food won’t scorch, and I love the handle.” She adds that its anodized surface is easy to clean.
Do you cook lots of soup on weekends to freeze for meals during the week? A heavy stockpot may be essential. “I always choose heavy-gauge for anything that stays on the stove a long time,” says Larry Forgione, chef/owner of the New York City restaurant An American Place, who says food burns and sticks whenever he uses a thin stockpot. Abby Dodge, Fine Cooking’s recipe tester, agrees. “With soups and stocks, a heavy bottom comes first,” she insists. “And if your budget allows it, go for the best.”
Do you make pasta several times a week? Don’t toss that big, thinner-gauge pasta pot if you already have one; it’s fine for boiling and steaming — and lighter is better when you’re carting a boiling pot from stove to sink. But if you don’t have a big pot yet, think about doubling up your pasta-boiling with stock- and soup-making by using a heavy stockpot.
Do you like making sauces? “When I’m browning or deglazing, I need to see what the pan juices are doing,” says Jim Peterson, Fine Cooking contributing editor and chef. For such jobs, he avoids pans with a darker interior, such as anodized aluminum, and prefers a shiny stainless-steel lining.
Nancy Silverton, baker, pastry chef, and co-owner of La Brea Bakery and Campanile in Los Angeles, agrees. “I love the steady heat and surface of seasoned cast iron, but seeing color change is crucial, so I need a pan that’s bright inside, like stainless,” she says. Silverton cautions that tin- and aluminum-lined pans affect the taste of acidic foods, such as compotes and fruit fillings. Both Peterson and Silverton love the visual warmth of copper but agree that top-notch stainless with an aluminum core, like All-Clad, works just as well.
Do you often serve stews, pot roasts, or braised meat dishes? Paul Bertolli loves the way Le Creuset enameled cast iron handles such dishes. “I can start dishes on the stove, transfer them to the oven, and all the juices will be ready to deglaze in the same pot.” He adds that one-pot cooking makes for swift cleanup, too. And Scott Peacock, a southern chef, loves enameled cast iron because “you can put on a lid, set the pot at the back of the stove, and it will hold the food at a good serving temperature a long while.”
Do you like cooking chops, steaks, or thick fish fillets? Cast iron may be heavy, but chef and writer Regina Schrambling says that “for searing fish at intense heat and finishing it in the oven, I trust it.” Scott Peacock likes it, too, especially for making golden-crusted cornbread, but cautions that unless cast iron is well seasoned, it can make acidic foods taste metallic, and that metal utensils themselves are apt to scrape off seasoning.
Are you trying to cook with less fat? Nonstick may be a good choice, and happily, nonstick technology has come a long way in the past few years. With the old-style, lighter-weight nonstick pans, it was hard to get the pan hot enough to sauté properly. Nonstick pans are now being made of harder, high-heat-tolerant metals, such as anodized aluminum and stainless steel, and the coatings themselves can withstand more heat and abrasion — no more nonstick flakes in your food. Another potential disadvantage of sautéing in nonstick is the difficulty in deglazing. The nonstick surface can be so effective that you never get any good brown bits in the bottom of the pan. With Circulon, which has a finely ridged nonstick interior, browning takes place more like in a conventional pan, and Circulon’s Commercial line is super heavy duty.
The Chinese iron pan can function as a nonstick pan even without a polytetrafluoroethylene (PTFE) coating after a “Kitchen God blessing” seasoning process. We simulate this process and disclose the science behind the “Kitchen God blessing,” finding that through repeated oil-coating and heating, the reversible insertion and extraction of oxygen atoms split the surface of the iron pan, gradually producing Fe3O4 nanoballs. These balls give the iron pan a conditional hydrophobicity property, meaning the pan would be hydrophilic when the ingredients contain much water and hydrophobic when they contain less water. The former enables heat to be transferred rapidly through the nanoballs while the latter slows down the heat transference and prevents the pan from sticking. This discovery provides an approach of generating nanoballs on the surface of the metal and also discloses the secret of the fantastic taste produced by cooking with a Chinese iron pan.
“Kung-Pao Chicken,” one of the most famous Chinese dishes, is difficult to cook in Western kitchens. The secret behind the successful creation of this dish is the Chinese iron pan. Nonstick pans are produced by coating them with polytetrafluoroethylene (PTFE) materials to construct a superhydrophobic surface [1,2]. Besides the environmental and safe concerns about the PTFE coating, the PTFE's low surface energy [3,4], although it creates a nonstick pan, is detrimental to the taste of the cooked food. Because of the oleophobic/hydrophobic quality of the PTFE materials, the fat serving as the heating medium aggregates into clusters instead of dispersing homogeneously, hindering the even transference of heat to the ingredients, adversely affecting the taste of the final product. In contradistinction to this, there is an ancient saying in China that the Kitchen God will bless a pan and endow it with the oleophilic/hydrophobic quality and a stainless surface after a special seasoning process. The seasoning process, or “the pan's inauguration”, is somewhat religious in nature, but the result, in actuality, is based on science. At the very beginning, the Kitchen God, a native Chinese spirit, is invited through incense-burning. Then, the inner surface of a fresh pan is coated with animal fat (in this work we chose beef tallow). Next, the pan is placed on a stovetop and heated with a low flame for several minutes. This process is repeated several times until the Kitchen God's blessing is received. After seasoning, the pan, made of cast iron, will remain bright for several years. In reality, seasoning ends when the pan has made the proper contact angles with the water and oil, which is determined by the chef, rather than by the Kitchen God (Fig. 1(a, b and c)). The oil acts as the reaction medium in the cooking process, making an oleophilic surface essential for the food to have a good taste. Ingredients are always watery, so a hydrophobic surface is vital for a nonstick pan. For this reason, almost every chef in a Chinese restaurant treats their oleophilic/hydrophobic iron pans as priceless treasures. As they generally don't know how to season their pans properly, most Westerners find it difficult to replicate the taste of Kung-Pao Chicken or other delicious stir-fried Chinese food.
Now the secret behind the seasoning of the Chinese iron pan will be revealed. We investigated the seasoning process with burner temperatures ranging from 375○C to 600○C. The morphologies of these experiments are shown in Fig. 2(a). The samples were named Fe-temperature-cycle number, e.g., Fe-450-3 refers to the sample seasoned three times at 450○C. The surface of the pan turned black after seasoning at 375○C and 450○C and rusted at 600○C. As shown in Fig. 1(b), after five cycles of seasoning at different temperatures, Fe-450-5 exhibited a hydrophobic surface with a contact angle of 117.6○ with water droplets. All the samples had oleophilic surfaces, which guarantee uniform heat transfer from the pan to the food (Fig. 1©). The hydrophobicity of the Fe-450-5 surface was attributed to the formation of Fe3O4 nanoballs after seasoning.
The volume expansion during the seasoning cycles is reversible. The diagrams and SEM images in Fig. 3(d–e) show the vertical formation and growth of Fe3O4 nanoballs. We can clearly determine that when an iron pan is seasoned at 450 °C, the smooth surface of the iron pan gradually becomes coarse during the first two cycles, and nanoballs begin to appear. Interestingly, the nanoballs shrink after the 3rd seasoning cycle (Fig. 3(d) and Fig. S2). For each seasoning cycle, the beef tallow first provides a low Po2 and then evaporates to provide a high Po2. During this process, the coordinate number of the surface iron atoms repeatedly changes between six and four. The formed Fe3O4 repeatedly shrinks and expands and finally large particles crack into small nanoballs.